Skip to content

Route 53 and ACM

Status: AI draft, 2026-11-16. Not yet verified by me. Commands are from the official documentation and were not run; output is illustrative.

In one line

Route 53 hosts DNS zones: public zones answer the internet, private zones answer only inside associated VPCs, alias records point names (even the zone apex) at AWS resources, and routing policies with health checks steer traffic. ACM issues and automatically renews TLS certificates for AWS services, validated through a DNS record; certificates are regional, and CloudFront's must be in us-east-1.

The plain idea

The general DNS mechanics are on DNS. Route 53 is AWS's authoritative DNS service: you keep your zones there, and it answers queries for them from servers around the world. It adds a few AWS-specific abilities: names that follow AWS resources whose addresses change, answers that depend on health or location, and zones visible only inside your VPCs.

Certificates go with names. ACM (AWS Certificate Manager) issues the TLS certificates that load balancers, CloudFront and API Gateway present (TLS and certificates). It proves you own the domain by asking you to publish a DNS record, and then renews the certificate before it expires, as long as that record stays in place. Most expired-certificate outages simply cannot happen with it.

How it works

Hosted zones

Zone type Answers Used for
Public hosted zone Anyone on the internet example.com and its public records
Private hosted zone Only queries from VPCs associated with it, through the VPC resolver Internal names such as db.internal.example.com

For a public zone to take effect, the domain's registrar must list the zone's four Route 53 name servers as the domain's NS records. That is delegation; until it is done, Route 53 answers nobody.

Using the same name in a public and a private zone gives split-horizon DNS: inside the VPC, api.example.com resolves to a private address; outside, to a public one.

Alias records

An alias record is a Route 53 extension that points a name at an AWS resource (a load balancer, a CloudFront distribution, an API Gateway, an S3 website, another record) instead of at an address.

  • It follows the resource's changing addresses automatically.
  • It works at the zone apex (example.com itself), where a CNAME is not allowed.
  • Route 53 does not charge for queries to alias records that point at AWS resources.
  • Its TTL comes from the target, not from your setting.

Routing policies

Policy Use it for
Simple One resource
Weighted Gradual migrations and canaries between two endpoints
Latency Several regions; send users to the fastest
Failover Active-passive disaster recovery (Backup and disaster recovery)
Geolocation, geoproximity Content or compliance by location
Multivalue answer Up to several healthy addresses, as simple client-side balancing

Health checks test an endpoint (HTTP, HTTPS or TCP) from several locations, or watch a CloudWatch alarm, or combine other checks. Records linked to a failing check stop being returned. DNS failover is still limited by caching: clients keep the old answer until its TTL expires.

Resolving between VPCs and on-premises

Each VPC uses the Route 53 Resolver (VPC basics). To let on-premises servers resolve private zones, create an inbound endpoint; to let VPCs resolve on-premises names, create an outbound endpoint with forwarding rules for those domains (Peering, Transit Gateway and VPN).

ACM

sequenceDiagram
    participant Y as You
    participant A as ACM
    participant D as Route 53
    Y->>A: Request a certificate for<br/>api.example.com
    A-->>Y: Publish this CNAME<br/>to prove ownership
    Y->>D: Create the validation<br/>CNAME record
    A->>D: Look up the record
    A-->>Y: Certificate issued
    A->>A: Renews automatically<br/>while the record stays
  • DNS validation is the recommended method: one CNAME per name, and it keeps renewals automatic. Email validation also exists but needs a human for every renewal.
  • Public certificates from ACM have no charge when used with integrated services; the private key stays in AWS and is used by the load balancer, CloudFront or API Gateway. Check the current ACM documentation for export options and pricing.
  • Certificates are regional. A load balancer in ap-south-1 needs a certificate requested in ap-south-1. CloudFront uses certificates from us-east-1 only.
  • A certificate can cover several names (SANs) and wildcards such as *.example.com.
  • AWS Private CA issues private certificates for internal services and mTLS.

A concrete example

Move api.example.com from an old load balancer to a new one with no downtime and a rollback.

  1. Request an ACM certificate for api.example.com in the new load balancer's region; add the validation CNAME to the public zone. It is issued within minutes.
  2. Attach it to the new load balancer's HTTPS listener, and test with curl --resolve api.example.com:443:<new-lb-ip> https://api.example.com/ before DNS changes (curl -v, line by line).
  3. Days before, lower the record's TTL so changes spread quickly. (Alias records use the target's TTL.)
  4. Create two weighted alias records for api.example.com: old load balancer weight 90, new weight 10. Watch errors and latency on the new one.
  5. Shift to 50/50, then 0/100. Rollback at any step is a weight change.
  6. Remove the old record and, later, the old load balancer.

Why not just...?

  • ...use a CNAME to the load balancer's DNS name? Fine for subdomains, but a CNAME is not allowed at the zone apex, and each CNAME adds a lookup. An alias record works everywhere and costs nothing for AWS targets.
  • ...rely on DNS failover for instant recovery? Clients and resolvers cache answers for the TTL, and some ignore short TTLs. DNS failover takes minutes; for faster failover, use load balancers or Global Accelerator in front (ALB and NLB).
  • ...upload certificates bought elsewhere to the load balancer? It works, but renewal becomes your job again, and forgetting it is a classic outage. ACM-issued certificates renew themselves.

Commands to know

Command What it does
aws route53 list-hosted-zones Zones, with public or private flag.
aws route53 list-resource-record-sets --hosted-zone-id <zone-id> --query "ResourceRecordSets[?Name=='api.example.com.']" The records for one name, including routing policy and alias target.
aws route53 get-hosted-zone --id <zone-id> The zone's name servers, to compare with the registrar's NS records.
aws route53 test-dns-answer --hosted-zone-id <zone-id> --record-name api.example.com --record-type A What Route 53 would answer, without caches in between.
aws acm list-certificates --region ap-south-1 Certificates in a region.
aws acm describe-certificate --certificate-arn <arn> Names, status, validation records, renewal eligibility and which resources use it.
dig NS example.com, dig @<route53-ns> api.example.com Check delegation and ask Route 53 directly (DNS).

How it breaks

Symptom Layer Check Likely cause
New public zone records not visible anywhere Delegation dig NS example.com against the zone's name servers Registrar still points at the old name servers
Private zone name does not resolve in a VPC Association, VPC DNS Zone's associated VPCs; enableDnsSupport and enableDnsHostnames VPC not associated, or DNS attributes off
Different answers inside and outside Split-horizon Query from both sides Public and private zones with the same name
Certificate stuck in Pending validation Validation describe-certificate for the CNAME Validation record missing or wrong
Certificate failed to renew Renewal Validation record still present? Record deleted, or email validation not answered
CloudFront cannot find your certificate Region Where the certificate was requested Must be in us-east-1
Failover did not happen Health checks Health check status; record configuration Records not linked to a health check, or checks probing the wrong path

Interview questions

1. What is an alias record, and how does it differ from a CNAME?

Answer
  • A Route 53 record that points at an AWS resource and returns its current addresses.
  • It works at the zone apex, where a CNAME cannot.
  • Queries to AWS targets are free, and the TTL follows the target.

2. What is the difference between a public and a private hosted zone?

Answer
  • A public zone answers the internet once delegated at the registrar.
  • A private zone answers only queries from associated VPCs.
  • Both with the same name give split-horizon DNS.

3. Name Route 53 routing policies and a use for each.

Answer
  • Weighted for gradual migrations and canaries.
  • Latency for multi-region performance.
  • Failover with health checks for active-passive DR.
  • Geolocation for location-based content or compliance; simple for one resource.

4. How does ACM validate and renew certificates?

Answer
  • DNS validation: you publish a CNAME that proves domain control.
  • ACM checks it, issues the certificate, and renews automatically before expiry while the record remains.
  • Email validation needs manual approval at each renewal.

5. Why does a CloudFront distribution not see a certificate you created in ap-south-1?

Answer
  • ACM certificates are regional.
  • CloudFront only uses certificates from us-east-1.
  • Request or import the certificate there.

6. How would you migrate a domain to a new load balancer with a safe rollback?

Answer
  • Issue the certificate and test the new endpoint directly with curl --resolve.
  • Lower TTLs ahead of time.
  • Use weighted records to shift traffic in steps, watching metrics.
  • Roll back by changing weights; remove the old target when stable.

Try it

Untested: written from documentation. The DNS part runs without an AWS account.

Step 1. Find who answers for a domain and confirm delegation.

dig +short NS example.com
dig +short @$(dig +short NS example.com | head -1) example.com A

Step 2. On paper, write the records for example.com (apex) and www.example.com pointing at one load balancer, using alias records, and a weighted pair for api.example.com sending 10% to a new load balancer.

Step 3. Write the steps to request an ACM certificate for example.com and *.example.com for a load balancer in ap-south-1 and for CloudFront, and say how many certificates and in which regions.

Zoom out

Route 53 and ACM are the first two hops of One request, end to end: name to address, and the certificate that proves it. Both build on the general mechanisms in DNS and TLS and certificates, and both are also where many outages begin: a deleted record, an expired certificate, a missed delegation. The principle to carry: automate certificate renewal, keep TTLs short before changes, and verify DNS from where users actually are.

Sources